1/2 inch system with outstanding price

The At-95 fits very well moderately severe clay/tone arms. Tonally quite balanced, it shines particularly with a marvelous timing and a musical expression strength.

Test report in "Stereoplay" 12/2000
valuation: Outstandingly!.

Elliptic needle, output voltage 6,1 mVs,
impedance 682 Ohm-417 mH,
depth scanning ability > 80 dB,
high clay/tone distortion 0,25%,
depth resonance 9 Hz,
system weight 5,7 g,
receiver edition 18mN,
receiver clay/tone arm weight class moderately severe.

1/2 inch system.
Cheap - but nice!

spheric diamond cross section
frequency range 20-20.000 Hz
output voltage 3.5 mV

1/2 inch system
Sounds very fresh and lifefull

elliptic cross section,
frequency range 20-20.000 Hz
output voltage 4.5 mV

1/2 inch system
with the perfekt weight for price and excellent sound!

Needletype: MicroLine ^TM
frequency range: 5-32.000 Hz !!!
output voltage: 5.0 mV

Akai
APM 70

36,00 € 

Special Akai "screwing in system".

Magnetic system with spherical needle.

Tracking force 1.5-2 g,
frequency range 10-20,000 Hz,
output voltage 6,1 mVs,
impedance 682 Ohm / 417 mH,
depth scanning ability > 80,
high clay/tone distortion 0,25%,
depth resonance 9 Hz,
system weight 5.7 g,
receiver edition 18mN

Receiver clay/tone arm weight class moderately severe.

1/2 inch system for DJ enterprise

with fluoreszense Needlenose for
accurate put on.

Output voltage 8 mVs,
channel balance < 2 dB,
channel cross modulation over 18 dB,
tracking force 4-5g (4,5g opt),
total weight 5g,
freq. Range 20-22,000 Hz

1/2 inch system for lovers of the home Hifi range.

Output voltage 3 mV,
channel balance < 2 dB,
channel cross modulation over 17 dB,
tracking force 2-3 g (opt 2.5),
diamond cross section,
total weight 5g,
freq.range 20-20,000 Hz +/- 4 dB

1/2 inch Moving Coil system.
Very high-quality system.

The DL103 is a classical author for middle and heavy clay/tone arms.
The MC system absolutely particularly for classical and jazz musik. We install this system professionally onto the pertinent Dual headshells.

Frequency range: 20 Hz - 45 kHz !!!
output voltage: 0.3 mVs
output impedance: 40 ohms
weight: 8.5 g

1/2 inch Moving Coil system with high output voltage.

Very special high-quality system at the mm entrance of the amplifier without further preamplifier to be operated knows and the quality a moving coil of system offers nevertheless. The DL 110 plays very balanced, openly and expression-strongly. Better as many other scanners of its Class. Especial within the dual range than replacement for the MMC120.

High output MC system.
Frequency range: 20 - 45 kHz !!!
output voltage: 1.6 mVs,
output impedance: 160 ohms,
weight: 4.8 g,
receiver tracking force: 18 mN,
receivers tonearm weight class: moderately

1/2 inch System for DJ`s

Output: 8 mV,
channel balance < 2 dB,
channel cross modulation 22 dB,
tracking force 4-6 g,
elliptic cross section,
total weight 5g,
freq. range 10-22.000 Hz

1/2 inch System for DJ`s

Output 8 mV,
channel balance < 2 dB,
channel cross modulation 22 dB,
tracking force 4-6 g,
elliptic cross section,
total weight 5g,
freq.range 10-22,000 Hz

1/2" System. As special DUAL replacement with TKS Headshells.

Particularly within the dual range as replacement for the MMC120 in the best way suitably. High-quality-system.

Output voltage 2mV,
tracking force 1.5 - 1.75 g,
frequency range 20 - 22000 Hz,
channel select 22dB,
channel equality 1,5dB

1/2 inch system. HiFi quality.

frequenzy range 10-28,000 Hz,
output voltage 5 mVs,
tracking force 1.2-2 g - optimal 1,5g,
total weight 6g

1/2 inch system for DJ's.

Output voltage 5 mVs,
channel balance < 2 dB,
channel cross modulation over 17 dB, tracking force 3-5 g,
spheric diamond cross section,
total weight 5g,
frequenzy range 20-20,000 Hz

1/2 inch Cartrige for middle and light clay/tone arms.

Output Voltage: 4 mVs,
frequenzy range at - 3dB 20-20,000 Hz,
type of needle: spheric,
tracking force 1.5-2.0 g,
weight 5 g

1/2 inch system for middle and light clay/tone arms. Increased quality!

Output Voltage: 4 mVs,
frequency range at - 3dB 20-24,000 Hz,.
type of Needle: elliptic,
tracking force 1.25-1.75 g,
weight 5 g

1/2 tariff system for middle and light clay/tone arms.

Outstanding quality!

Output voltage 4 mVs,
frequency range at - 3dB 20-27,000 Hz
type of needle: elliptic,
tracking force 1,5-2.0 g,
weight 5 g

1/2 inch Moving Coil system with high output voltage.

Very special high-quality system at the magnet entrance of the amplifier without further preamplifier to be operated knows and the quality a moving coil of system offers nevertheless. The MC1 Turbo plays very balanced, openly and expression-strongly. Better as many other scanners of its Class.
High output MC system.
Frequency range: 20 - 25 kHz !!!
output voltage: 3,3 mVs,
output impedance: 160 ohms,
weight: 4.8 g,
receiver tracking force: 20 mN,
receivers tonearm weight class: moderately

T4P Moving Coil system with high output voltage.

Very special high-quality system at the mm entrance of the amplifier without further preamplifier to be operated knows and the quality a moving coil of system offers nevertheless. The X3 MCP replaces very good Technics (National) P310.

Frequency range: 20 - 25 kHz !!!
output voltage: 2,2 mVs,
output impedance: 160 ohms,
weight: 4.8 g,
receiver tracking force: 12,5 - 20 mN,
receivers tonearm weight class: moderately

T4P-System - HiFi quality.

Freq. range 10-22,000 Hz,
bearing weight 1,5g + - 0,25g
output voltage 4.2 mVs
weight 6.2 g

1/2 tariff Cartrige for DJ`s.

Property suitably for scratchers.
Needle cross section: conical,
frequency range 20-20,000 Hz,
tracking force 30-50 Nm,
freq. range more highly than 20 dB!
output voltage 5 mVs

Cartirdge for SME Ton arms.

Output voltage 5 mVs,
frequency - 3dB,
20-20,000 Hz,
bearing weight 3.0-5.0 g (30-50 mN)
weight 18.5 g